A
B
C
D
E
F
G
H
L
M
N
P
section
D 5
611098/1098S - M.Y. 2007 - edition 00
Use and maintenance
Select the option “Reset TPS” and then press the icon “Apply”.
On completion of the operation, the message “Was the operation was completed successfully?” will appear; press
“Confirm” (D).
If any problems were encountered during the operation, the tester will display the relative error messages: each message must
be confirmed, (by pressing the “Confirm” icon (D)), or rejected (by pressing the “Exit” icon (E)).
Once the reset has been performed, the ECU will be associated with the motorcycle's throttle body. Replacement of the throttle
body, the ECU or the wiring must always be immediately followed by a new reset procedure.
D
D
E
To Next Page
Loading...
