A
B
C
D
E
F
G
H
L
M
N
P
section
C 2
111098/1098S - M.Y. 2007 - edition 00
Technical data
2 - Fuel, lubricants and other fluids
Important
The use of fuel or lubricant additives is not permitted.
Engine oil
A good quality engine oil has special properties. Use only a highly detergent engine oil with certified SE, SF or SG or higher service
ratings as marked on the container.
Oil viscosity
SAE 10W-40
The other viscosity grades specified in the table can be used where the average ambient temperatures are within the limits
shown.
Fuel, lubricants and other fluids Type dm³ (litres)
Fuel tank, including a reserve of 3 dm
3
(litres) Unleaded fuel with 95 fuel octane rating (at least) 15.5
Lubrication circuit SHELL Advance Ultra 4 3.4
Front/rear brake and clutch circuits SHELL Advance Brake DOT 4 -
Protection for electrical contacts SHELL Advance Contact Cleaner -
Front fork for 1098 only SHELL Advance Fork 7.5 or DONAX TA 0.511 (each leg)
Front fork for 1098S only SHELL Advance Fork 7.5 or DONAX TA 115 mm (each leg)
oil level height
Cooling system SHELL Advance Coolant or Glyco SHELL 35-40% + water 2.3
40
–10
14
Uni
grade
Multi
grade
0
32
10
50
20
68
30
86
40 C
104 F
20W–40 20W–50
15W–40 15W–50
10W–40
10W–30
10W
20W
20
30
To Next Page
Loading...
