A
B
C
D
E
F
G
H
L
M
N
P
section
H 5
231098/1098S - M.Y. 2007 - edition 00
Frame
Refitting the sidestand
Position the plate (3) on the frame, apply recommended threadlocker to the two bolts (2).
Tighten the bolts (2) to the specified torque (Sect. C 3).
Connect the side stand switch connector (A) to the main wiring harness.
For correct routing of the sidestand switch wiring, refer to the plates in Sect. P 1.
Operation Section reference
Refit the left-hand side fairing E 2
5
LOCK
2
1
3
To Next Page
Loading...
