A
B
C
D
E
F
G
H
L
M
N
P
section
G 7
531098/1098S - M.Y. 2007 - edition 00
Wheels - Suspensions - Brakes
Rear suspension system
The rear suspension uses a fully adjustable progressive hydraulic monoshock (10). The system consists of an upper rocker arm
(8) and an adjustable tie-rod (14), which is fixed to the single-sided swingarm.
The swingarm pivots on the frame and the engine to achieve maximum rigidity; the rear end of the swingarm supports the
eccentric wheel hub which allows chain tension adjustment.
For adjustment of the rear shock absorber, refer to Sect. D 4.
8
10
14
To Next Page
Loading...
