Ducati 1098 2007 - Disassembly of the Right-Hand Side Crankcase Cover

A
B
C
D
E
F
G
H
L
M
N
P
section
N 6.2
128 1098/1098S - M.Y. 2007 - edition 00
Engine
Disassembly of the right-hand side crankcase cover
Remove the plug (3) and the O-ring (7), the engine oil pressure sensor (9) and the seal (8), the plug (16) and the seal (17) from the
crankcase cover.
Remove the circlip (13) and withdraw the shim (12) and the oil seal (11).
The drilled bush (10) is mounted to the cover by a forced interference fit. Remove it using a suitable puller.
Inspect the oil seal (11) and renew it if necessary.
16
9
3
11
10
12
13
10
11
12
13
WWW.PlanDeGraissage.ORG