A
B
C
D
E
F
G
H
L
M
N
P
section
D 4
40 1098/1098S - M.Y. 2007 - edition 00
Use and maintenance
Adjusting the clutch lever and front brake lever
The lever (1) disengages the clutch. The span adjuster (2) serves to alter the distance of the lever from the handlebar.
Lever distance is adjusted by 10 clicks of the knob (2). Turn the knob clockwise to move the lever away from twistgrip, or counter
clockwise to move it closer.
The position of the front brake lever (3) can be adjusted in the same way.
When the clutch lever (1) is operated, drive from the engine to the gearbox and the rear wheel is disengaged. Correct use of the
clutch lever is very important in all riding situations, especially when moving off.
Warning
Any adjustment of clutch and brake levers must only be carried out when motorcycle is stationary.
2
1
2
3
To Next Page
Loading...
