A
B
C
D
E
F
G
H
L
M
N
P
section
M 3
91098/1098S - M.Y. 2007 - edition 00
Injection - ignition system
Refitting the battery support
Check the condition of all rubber components and replace them if necessary.
Insert the small diameter side of the spacers (18) into their rubbers.
Notes
If the regulator/rectifier and the contactor were removed, refit following instructions in Sect. P 2.
Fit the regulator fuse (14) inserting through the holes in the battery support.
18
16
18
16
19
17
14
To Next Page
Loading...
