A
B
C
D
E
F
G
H
L
M
N
P
section
N 2.1
131098/1098S - M.Y. 2007 - edition 00
Engine
Reassembly of the oil pump
Check that the circlip (3) and Woodruff key (13) are both present on the pump.
Fit the pump drive gear (12) on to the oil pump and secure it by installing the circlip (6) in its groove.
Install in the pump the by-pass valve (17) and the spring (16); screw in the plug (14) and tighten to the specified torque
(Sect. C 3, Engine torque settings) after applying a medium strength threadlocker.
12
6
5
LOCK
17
14
16
To Next Page
Loading...
