Ducati 1098 2007 - Page 137

A
B
C
D
E
F
G
H
L
M
N
P
section
D 5
851098/1098S - M.Y. 2007 - edition 00
Use and maintenance
On the DDS tester (1), select the “Measurement module” function by pressing the corresponding icon; then press the
“Ammeter” icon (F) followed by the “Start” icon.
The socket to which the cable (Measurement Module) (3) is to be connected is indicated on the screen with a capital letter: A, B
or C.
1
F
A
B
C
3
WWW.PlanDeGraissage.ORG