A
B
C
D
E
F
G
H
L
M
N
P
section
F 2
10 1098/1098S - M.Y. 2007 - edition 00
Controls - Devices
For routing of the clutch hose (6) and retaining clips, see the illustration at the end of this section.
Locate the hose (6) as shown in the figure, then tighten down the special bolt (16) to the specified torque (Sect. C 3).
Operation Section reference
Fill the clutch system with fluid D 4
108˚ ± 2˚
6
1
To Next Page