A
B
C
D
E
F
G
H
L
M
N
P
section
G 5
471098/1098S - M.Y. 2007 - edition 00
Wheels - Suspensions - Brakes
Locate the swingarm (4) on the frame.
Lubricate the swingarm pivot shaft (1) with the recommended grease and drive it home in the frame.
On the opposite side of the bike, secure the swingarm pivot shaft (1) with the nut (5) after applying the recommended grease,
interposing the washers (6).
Tighten the wheel nut (5) to the specified torque (Sect. C 3).
Connect the speed sensor to the main wiring loom.
Operation Section reference
Reconnect the shock absorber and tie-rod
to the swingarm
G7
Refit the rear brake caliper G 6
Refit the rear sprocket G 8
Refit the rear wheel G 4
1
D
5
D
To Next Page
Loading...
