A
B
C
D
E
F
G
H
L
M
N
P
section
H 2
131098/1098S - M.Y. 2007 - edition 00
Frame
Tighten the steering stem nut (4) by hand until it seats against the oil seal (2).
Fit service bush part no. 88713.1058 to the steering stem nut (4) and fit the torque wrench to the bush.
Tighten the steering stem nut (4) to the specified torque (Sect. C 3).
Fit the top yoke (7) onto the steering stem nut (4), aligning the fork leg bores with the corresponding bores on the bottom yoke.
Relocate the fork legs as described in Sect. G 3.
Grease the bolt (6).
Tighten the bolt (6) on the top yoke to the specified torque (Sect. C 3).
Operation Section reference
Refit the fork legs G 2
Refit the steering damper H 3
Refit the headlight shell E 1
Refit the side fairings E 2
88713.1058
4
88713.1058
4
7
6
To Next Page
Loading...
