A
B
C
D
E
F
G
H
L
M
N
P
section
P 2
44 1098/1098S - M.Y. 2007 - edition 00
Electric system
Battery
Battery safety rules
Warning
Carefully read the relevant safety rules before working on the battery (Sect. A 3, General safety rules). When under charge,
batteries produce explosive gases. Keep batteries away from heat sources, sparks or open flames.
Instructions for use
The battery is of the sealed, maintenance-free type and requires no work to be done on it at the time of installation.
Notes
Always keep the battery clean. Apply grease around the battery terminal clamps to prevent corrosion.
Warning
Never remove the valve cover located on top of the cover. If the block, cover or terminals are broken or if the valve cover has
been tampered with it is essential to change the battery.
Important
If the motorcycle is left unused for more than 30 days, remove the battery and store it in a safe, cool place.
Always charge the battery before the first use and after long storage periods - such as before selling the vehicle.
Removal of the battery
Remove the left-hand side fairing (Sect. E 2).
Unscrew the bolt (2) and securing the bracket (3), then remove the bracket (A) and (5).
Undo the terminal bolts (4) and (5). Always start with the negative terminal.
Remove the battery (1).
2
3
4
1
5
To Next Page
Loading...
