A
B
C
D
E
F
G
H
L
M
N
P
section
P 7
86 1098/1098S - M.Y. 2007 - edition 00
Electric system
Trip meter “TRIP B”
While in this function, if you press button (1) in position B “▼” for 3 seconds, the reading is reset to zero.
If the reading exceeds 999.9, it is reset to zero and the count restarts automatically.
If the system’s units of measurement are changed at any time with the “Setting Special” function, the reading in this function
is reset and the count restarts from zero in the new unit of measurement.
vs. EU
vs. UK
v.s. USA
1
B
To Next Page