C
HAPTER
19
| IP Services
Dynamic Host Configuration Protocol
– 473 –
WEB INTERFACE
To configure IP addresses excluded for DHCP clients:
1. Click IP Service, DHCP, Server.
2. Select Configure Excluded Addresses from the Step list.
3. Select Add from the Action list.
4. Enter a single address or an address range.
5. Click Apply.
Figure 297: Configuring Excluded Addresses on the DHCP Server
To show the IP addresses excluded for DHCP clients:
1. Click IP Service, DHCP, Server.
2. Select Configure Excluded Addresses from the Step list.
3. Select Show from the Action list.
Figure 298: Showing Excluded Addresses on the DHCP Server
CONFIGURING ADDRESS POOLS
Use the IP Service > DHCP > Server (Configure Pool – Add) page configure
IP address pools for each IP interface that will provide addresses to
attached clients via the DHCP server.
CLI REFERENCES
◆ "DHCP Server" on page 982
To Next Page
Loading...
