Edge-Core ECS4610-24F User Manual

C HAPTER 20 | Unicast Routing
Configuring the Open Shortest Path First Protocol (Version 2)
– 529 –
Figure 349: Configuring Settings for All Interfaces Assigned to a VLAN
To configure interface settings for a specific area assigned to a VLAN:
1. Click Routing Protocol, OSPF, Interface.
2. Select Configure by Address from the Action list.
3. Specify the VLAN ID, enter the address assigned to an area, and
configure the required interface settings.
4. Click Apply.

Edge-Core ECS4610-24F Specifications

General

Brand	Edge-Core
Model	ECS4610-24F
Category	Network Router
Language	English