Fuji Xerox DocuPrint CM305 df - Replacing the Drum Cartridge

4 - 198
Chapter 4 Disassembly / Assembly and Adjustments
11) Remove the DRIVE ASSY PH from
the printer.
12) Disengage the connector (P/J261) of
the SENSOR PHOTO: COLOR
MODE SWITCHING (PL7.1.5) on
the DRIVE ASSY PH, release the
HARN ASSY KSNR REGCL MG
AIO (PL9.1.9) from the hook of the
DRIVE ASSY PH.
13) Release the three hooks that fix the
SENSOR PHOTO: COLOR MODE
SWITCHING to the DRIVE ASSY
PH, and remove the SENSOR
PHOTO: COLOR MODE SWITCH-
ING.
14) Remove the GEAR P2 (PL7.1.3)
from the shaft of the DRIVE ASSY
SUB (PL7.1.1).