4 - 228
Chapter 4 Disassembly / Assembly and Adjustments
[Replacement]
1) Mate the four holes and tab of the
PLATE ASSY TOP with the bosses and
hole of the printer, attach the FRAME
ASSY LVPS to the printer.
2) Secure the inside of the PLATE
ASSY TOP with the one screw (sil-
ver, M4, 6mm).
3) Secure the left side of the PLATE
ASSY TOP with the two screws (sil-
ver, M4, 6mm).
To Next Page
Loading...
