Chapter 3 ’Web User Graphical Interface’ — Operating Instructions (Tutorial)
146 Electra VS
-
Version 05.10
User Manual - Rev. A
2.
another workflow to pass through two PSI/SI tables
Figure 3-94. Multi-instance feature disabled - Another workflow with the corresponding
job
3.
etc.
If ‘Multi-instances’ feature is enabled
1.
Configure the multi-instantiable 'Component Extractor' Processing
component as follows:
a.
Check the box
Multi instance
b.
Give a name to the Processing component (
Name
, e.g.
TableEx t r a c t
)
c.
Define the number of instances present in the list by default
(
Default
value
, e.g.
1
)
To Next Page
Loading...