Chapter 3 ’Web User Graphical Interface’ — GUI Description
Electra VS
-
Version 05.10 175
User Manual - Rev. A
You can also specify the following parameters for the job:
Name
: name of the job. The name of the file that triggered the
job is also appended to the name of the job.
Priority
(available for file workflows only): if there are not
enough resources (CPU, memory, etc.) to process new jobs and
you want this particular job to be processed anyway, set an
important priority (between 1 and 250; 250 being the highest
priority). The jobs with high priority will be launch. The jobs
may be processed more slowly.
Speed
(available for file workflows only): if set to
1
, the job will
last at most as long as the video duration. If set to
2
, the job will
last at most half as long as the video duration, etc.
Note that if the network bitrate is too low, the speed target might
not be met.
If not configured, the job will be allocated the available
resources of the most available node.
To Next Page
Loading...