Chapter 3 ’Web User Graphical Interface’ — Workflow Library
284 Electra VS
-
Version 05.10
User Manual - Rev. A
ATS Source Description storage
: server location where the ATS
file is stored. Several methods allows to define the location. Refer to
section
’Video overlay’
on page 296 for the possibles syntaxes.
ATS Source Description file folder
: folder on the network
storage where the ATS file is stored.
ATS Source Description file name
: name of the ATS file.
Check
Use specific syntax
and configure the
External namespace
containing the SPS parameter if you want to add SPS/PP and indexBox
information in the ATS description file.
If you generate ATS file please check that your workflow follows the
following rules:
The input PIDs are used as « ContentComponent ID » in the ATS
source description file. As product “Halo” requires that
ContentComponent id (in the ATS source description file) equals
to the component PID (in the TS file), please check that you
configure the output PIDs to the same value as input PIDs.
Select
Encoder Boundary Point
in TS Video Packetizer.
Set
Number of frames per PES
to 1 in Ts Audio Packetizer.
Use only one video component per SPTS.
Do not share component in several SPTS.
To Next Page
Loading...