Chapter 3 ’Web User Graphical Interface’ — Workflow Library
336 Electra VS
-
Version 05.10
User Manual - Rev. A
In the
Input
tab, set the following parameter:
Input type
: see the
Input: Input
tab of TS Multiplexer processing
component (see section
’TS Multiplexer’
on page 327).
Controlled by statmux
(for video only):
If set to
false
the video component is in CBR mode.
If set to
true
, the video component will be driven by the statistical
multiplexing mechanism. You have to set the following parameters.
Minimum bitrate (TS overhead included)
: indicate the
minimum bitrate that the video component should have.
Maximum bitrate (TS overhead included)
: indicate the
maximum bitrate that the video component should have.
Quality
: set the picture quality level required, in percentage.
The value must be between 30 and 90% (best quality). Default
value: 70%.
If SDT generation is requested (i-e
Generate SDT
set to
true
above), fill
in the following fields:
Service type: service type of the program:
Digital television service (1)
,
Digital radio sound service (2)
,
Mosaic service (6)
.
Service name: program name of the program
Provider name: provider name of the program
To Next Page
Loading...