Chapter 2 ’Installation and Startup’ — Hardware Delivery
44 Electra VS
-
Version 05.10
User Manual - Rev. A
1.
Remove the top left hinge from the chassis (see below).
Figure 2-16. Removing the left hinge
2.
Install the front panel in the left hinges as follows:
Position the top left hinge so that its top screw inserts into the
hole in the top part of the front panel.
Figure 2-17. Inserting the top left hinge in the top part of the front panel
Raise the front panel and top left hinge together so that the
bottom screw of the bottom left hinge inserts into the hole in the
bottom part of the front panel.
Figure 2-18. Inserting the front panel into the bottom left hinge
left side
Remove the
screw.
To Next Page
Loading...