Keithley DMM7510 Reference Manual

Section
1: Introduction Model DMM7510 7½ Digit Graphical Sampling Multimeter
Reference Manual
1-2 DMM7510-901-01 Rev. B / May 2015
CD-ROM contents
Each Model DMM7510 instrument is shipped with the 7½ Digit Multimeter Product Information CD-
ROM (Keithley Instruments part number DMM7510-950-01).
The Model DMM7510 7½ Digit Multimeter Product Information CD-ROM contains:
• Quick Start Guide: Provides unpacking instructions, describes basic connections, reviews basic
operation information, and provides a quick test procedure to ensure the instrument is
operational.
• User's Manual: Provides application examples that you can use as a starting point to create your
own applications.
• Reference Manual: Includes advanced operation topics, maintenance information,
troubleshooting procedures, and in-depth descriptions of programming commands.
• KickStart Startup Software Quick Start Guide: Provides instructions for the KickStart Startup
Software, which allows you to quickly make measurements and get results without having to
program test scripts.
• Accessories information: Documentation for accessories that are available for the Model
DMM7510.
For the latest drivers and additional support information, see the Keithley Instruments website
(http://www.keithley.com).
Organization of manual sections
The information in this manual is organized into the following major categories:
• General operation: Describes the components of the instrument and basic operation.
• Functions and features: Describes features and functions, such as relative offset, filters,
reading buffers, configuration lists, triggering, the digital I/O port, and TSP-Link synchronization
lines.
• Measure considerations: Describes best practices and recommended procedures that can
increase measurement speed, accuracy, and sensitivity.
• Introduction to SCPI commands: Describes how to control the instrument using SCPI
commands.
• SCPI command reference: Contains programming notes and an alphabetical listing of all SCPI
commands available for the Model DMM7510.
• Introduction to TSP operation: Describes the basics of using Test Script Processor (TSP
®
)
commands to control the instrument and describes how to control the instrument using TSP
commands and Test Script Builder (TSB
®
) software, TSP-Link system expansion, and TSP-Net.
• TSP command reference: Contains programming notes and an alphabetical listing of all TSP
commands available for the Model DMM7510.
• Frequently asked questions: Contains information that answers commonly asked questions.
• Next steps: Contains sources of additional information.
• Maintenance: Contains information about instrument maintenance, including line fuse
replacement and firmware upgrades.

Keithley DMM7510 Specifications

General

Resolution	7.5 digits
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
DC Current Range	10 µA to 10 A
Resistance Range	10 Ω to 1 GΩ
Sampling Rate	1 MS/s
Memory	27.5 million readings
Display	5 inch capacitive touchscreen
AC Voltage Accuracy	±0.06% of reading
AC Current Range	10 A
Connectivity	USB, LAN, GPIB