Keithley DMM7510 Reference Manual

Section
6: SCPI command reference Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Man
ual
6-168 DMM7510-901-01 Rev. B / May 2015
:TRACe:STATistics:MAXimum?
This command returns the maximum reading value in the reading buffer.
Type Affected by Where saved Default value
Query only
Recall settings
Instrument reset
Power cycle
Not applicable
Not applicable
Usage
:TRACe:STATistics:MAXimum?
:TRACe:STATistics:MAXimum? "<bufferName>"
<bufferName>
A string that indicates the reading buffer; the default buffers
(defbuffer1 or defbuffer2) or the name of a user-
defined buffer; if no
buffer is specified,
defbuffer1
is used
Example
TRACe:STAT:MAXimum?
Returns the maximum reading value in the default
buffer,
defbuffer1
.
TRACe:STAT:MAXimum? "testData"
Returns the maximum reading value in the user-defined
buffer
testData
.
Also see
Reading buffers (on page 3-13)
Remote buffer operation (on page 3-30)
:TRACe:MAKE (on page 6-160)
:TRACe:STATistics:AVERage? (on page 6-166)
:TRACe:STATistics:CLEar (on page 6-167)
:TRACe:STATistics:MINimum? (on page 6-169)
:TRACe:STATistics:PK2Pk? (on page 6-170)
:TRACe:STATistics:STDDev? (on page 6-170)

Keithley DMM7510 Specifications

General

Resolution	7.5 digits
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
DC Current Range	10 µA to 10 A
Resistance Range	10 Ω to 1 GΩ
Sampling Rate	1 MS/s
Memory	27.5 million readings
Display	5 inch capacitive touchscreen
AC Voltage Accuracy	±0.06% of reading
AC Current Range	10 A
Connectivity	USB, LAN, GPIB