Keithley DMM7510

Section
8: TSP command reference Model DMM7510 7½ Digit Graphical Sampling Multimeter
Reference Manual
8-158 DMM7510-901-01 Rev. B / May 2015
dmm.measure.limit[Y].audible
This attribute determines if the instrument beeper sounds when a limit test passes or fails, or disables the beeper.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (RW) Yes
Restore configuration
Instrument reset
Power cycle
Measure configuration list
Configuration script
Measure configuration list
Continuity: dmm.AUDIBLE_PASS
Other functions:
dmm.AUDIBLE_NONE
Usage
state = dmm.measure.limit[Y].audible
dmm.measure.limit[Y].audible = state
state
When the beeper sounds:
• Never: dmm.AUDIBLE_NONE
• On test failure: dmm.AUDIBLE_FAIL
• On test pass:
dmm.AUDIBLE_PASS
Y
Limit number:
1
or
2
Functions
dmm.FUNC_DC_VOLTAGE
dmm.FUNC_RESISTANCE
dmm.FUNC_ACV_FREQUENCY
dmm.FUNC_AC_VOLTAGE
dmm.FUNC_4W_RESISTANCE
dmm.FUNC_ACV_PERIOD
dmm.FUNC_DC_CURRENT
dmm.FUNC_DIODE
dmm.FUNC_DCV_RATIO
dmm.FUNC_AC_CURRENT
dmm.FUNC_CAPACITANCE
dmm.FUNC_DIGITIZE_CURRENT
dmm.FUNC_TEMPERATURE
dmm.FUNC_CONTINUITY
dmm.FUNC_DIGITIZE_VOLTAGE
Details
The tone and length of beeper cannot be adjusted.
Example
See dmm.measure.limit[Y].low.value (on page 8-164) for an example of how to use this command.
Also see
dmm.digitize.limit[Y].audible (on page 8-92)
dmm.measure.limit[Y].enable (on page 8-161)