Keithley DMM7510 Reference Manual

Model DMM7510
7½ Digit Graphical Sampling Multimeter Reference Manual Section 8:
TSP command reference
DMM7510-901-01 Rev. B / May 2015 8-353
Details
The binary representation of data indicates the output pattern that is written to the I/O port. For
example, a data value of 2 has a binary equivalent of 010. Line 2 is set high (1), and the other two
lines are set low (0).
The reset() function does not affect the present states of the trigger lines.
Example
tsplink.writeport(3)
Sets the synchronization lines 1 and 2 high (binary 011).
Also see
tsplink.line[N].state (on page 8-350)
tspnet.clear()
This function clears any pending output data from the instrument.
Type TSP-Link accessible
Affected by Where saved Default value
Function
No
Usage
tspnet.clear(connectionID)
connectionID
The connection ID returned from tspnet.connect()
Details
This function clears any pending output data from the device. No data is returned to the caller and no
data is processed.
Example
tspnet.write(testdevice, "print([[hello]])")
print(tspnet.readavailable(testdevice))
tspnet.clear(testdevice)
print(tspnet.readavailable(testdevice))
Write data to a device, then print how much is
available.
Output:
6.00000e+00
Clear data and print how much data is
available again.
Output:
0.00000e+00
Also see
tspnet.connect() (on page 8-354)
tspnet.readavailable() (on page 8-358)
tspnet.write() (on page 8-364)

Keithley DMM7510 Specifications

General

Brand	Keithley
Model	DMM7510
Category	Multimeter
Language	English