Keithley DMM7510

Model DMM7510
7½ Digit Graphical Sampling Multimeter Reference Manual Section 8:
TSP command reference
DMM7510-901-01 Rev. B / May 2015 8-7
TSP commands
acal.count
This attribute returns the number of times automatic calibration has been run.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (R)
Yes
Not applicable
Not applicable
Not applicable
Usage
value = acal.count
value
The number of times auto calibration has been run
Details
The number of times that auto calibration has been run since the last factory calibration. The count
restarts at 1 after a factory calibration.
Example
print(acal.count)
Returns the number of times auto calibration has been
run.
Example output:
15
Also see
Auto calibration (on page 3-44)
acal.run() (on page 8-12)