Keithley DMM7510

Section
6: SCPI command reference Model DMM7510 7½ Digit Graphical Sampling Multimeter
Reference Manual
6-80 DMM7510-901-01 Rev. B / May 2015
[:SENSe[1]]:<function>:DELay:AUTO
This command enables or disables the automatic delay that occurs before each measurement.
Type Affected by Where saved Default value
Command and query
Recall settings
Instrument reset
Power cycle
Measure configuration list
Save settings
Measure configuration list
ON
Usage
[:SENSe[1]]:<function>:DELay:AUTO <state>
[:SENSe[1]]:<function>:DELay:AUTO?
<function>
The function to which the setting applies; see Functions
<state>
Disable the auto delay: OFF
Enable the auto delay: ON
Functions
VOLTage[:DC]
RESistance
TEMPerature
VOLTage[:DC]:RATio
VOLTage:AC
FRESistance
CONTinuity
DIGitize:VOLTage
CURRent[:DC]
DIODe
FREQuency[:VOLTage]
DIGitize:CURRent
CURRent:AC
CAPacitance
PERiod[:VOLTage]
Details
When this is enabled, a delay is added before each measurement.
Example
CURR:DEL:AUTO OFF
Turn off auto delay when DC current is
measured.
Also see
[:SENSe[1]]:<function>:DELay:USER<n> (on page 6-81)