To Next Page

To Previous Page

Section

8: TSP command reference Model DMM7510 7½ Digit Graphical Sampling Multimeter

Reference Manual

8-210 DMM7510-901-01 Rev. B / May 2015

file.flush()

This function writes buffered data to a file on the USB flash drive.

Type TSP-Link accessible

Affected by Where saved Default value

Function

Usage

file.flush(fileNumber)

fileNumber

The file number returned from the

file.open()

function to flush

Details

The file.write() function may buffer data instead of writing immediately to the USB flash drive.

Use file.flush() to flush this data. Data may be lost if the file is not closed or flushed before a

script ends.

If there is going to be a time delay before more data is written to a file, flush the file to prevent loss of

data because of an aborted test.

Also see

None

file.mkdir()

This function creates a directory at the specified path on the USB flash drive.

Type TSP-Link accessible

Affected by Where saved Default value

Function No

Usage

file.mkdir(path)

path

The path of the directory

Details

The directory path must be absolute.

Example

file.mkdir("TestData")

Create a new directory named TestData.

Also see

None

Keithley DMM7510 Reference Manual

Other manuals for Keithley DMM7510