8: TSP command reference Model DMM7510 7½ Digit Graphical Sampling Multimeter
8-284 DMM7510-901-01 Rev. B / May 2015
trigger.model.abort()
This function stops all trigger model commands on the instrument.
Type TSP-Link accessible
Affected by Where saved Default value
Usage
trigger.model.abort()
Details
When this command is received, the instrument stops the trigger model.
Example
Terminates all commands related to the trigger model on
the instrument.
Also see
Effect of GPIB line events on Model DMM7510 (on page 2-69)
Aborting the trigger model (on page 3-97)
Trigger model (on page 3-76)
trigger.model.getblocklist()
This function returns the settings for all trigger model blocks.
Type TSP-Link accessible
Affected by Where saved Default value
Usage
trigger.model.getblocklist()
Details
This returns the settings for the trigger model.
Example
print(trigger.model.getblocklist())
Returns the settings for the trigger model. Example output is:
1) BUFFER_CLEAR BUFFER: defbuffer1
2) MEASURE BUFFER: defbuffer1 COUNT: 1
3) BRANCH_COUNTER VALUE: 5 BRANCH_BLOCK: 2
4) DELAY_CONSTANT DELAY: 1.000000000
5) BRANCH_COUNTER VALUE: 3 BRANCH_BLOCK: 2
Also see
trigger.model.getbranchcount() (on page 8-285)
To Next Page
Loading...
Need help?
General
