To Next Page

To Previous Page

Model DMM7510

7½ Digit Graphical Sampling Multimeter Reference Manual Section 6:

SCPI command reference

DMM7510-901-01 Rev. B / May 2015 6-151

:SYSTem:VERSion?

Query the present SCPI version.

Type Affected by Where saved Default value

Query only

Not applicable

Usage

:SYSTem:VERSion?

Details

This query command returns the SCPI version.

Example

SYSTem:VERSion?

Query the version. An example of a return is:

1996.0

Also see

None

TRACe subsystem

The TRACe subsystem contains commands that control the reading buffers.

:TRACe:ACTual?

This command contains the number of readings in the specified reading buffer.

Type Affected by Where saved Default value

Query only

Recall settings

Instrument reset

Power cycle

Not applicable Not applicable

Usage

:TRACe:ACTual?

:TRACe:ACTual? "<bufferName>"

A string that indicates the reading buffer; the default buffers (defbuffer1 or

defbuffer2) or the name of a user-defined buffer; if no buffer is specified,

defbuffer1 is used

Details

This command returns the number of readings stored in the buffer.

Keithley DMM7510 Reference Manual

Other manuals for Keithley DMM7510