Keithley DMM7510 Reference Manual

Section
2: General operation Model DMM7510 7½ Digit Graphical Sampling Multimeter
Reference Manual
2-62 DMM7510-901-01 Rev. B / May 2015
Figure 34: Model DMM7510 top and side dimensions with handle and bumpers removed
Handle and bumpers
The Model DMM7510 has a handle and front and rear bumpers for using the instrument on a
benchtop. The handle rotates so that you can swing it below the bottom surface of the instrument to
tilt the instrument up for easier front-panel viewing, or to carry the instrument from one location to
another.
Removing the handle and bumpers
You can remove handle and bumpers on the Model DMM7510 if you want to mount the instrument in
a rack.
If you remove the handle and bumpers, be sure to store them for future benchtop use.

Keithley DMM7510 Specifications

General

Resolution	7.5 digits
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
DC Current Range	10 µA to 10 A
Resistance Range	10 Ω to 1 GΩ
Sampling Rate	1 MS/s
Memory	27.5 million readings
Display	5 inch capacitive touchscreen
AC Voltage Accuracy	±0.06% of reading
AC Current Range	10 A
Connectivity	USB, LAN, GPIB