7½ Digit Graphical Sampling Multimeter Reference Manual Section 5:
Introduction to SCPI commands
DMM7510-901-01 Rev. B / May 2015 5-5
Using the SCPI command reference
The SCPI command reference contains detailed descriptions of each of the SCPI commands that you
can use to control your instrument. Each command description is broken into several standard
subsections. The figure below shows an example of a command description.
Figure 146: SCPI command description example
Each command listing is divided into five major subsections that contain information about the
command:
• Command name and summary table
• Usage
• Details
• Example
• Also see
The content of each of these subsections is described in the following topics.
To Next Page
Loading...
Need help?
General
