To Next Page

To Previous Page

Section

8: TSP command reference Model DMM7510 7½ Digit Graphical Sampling Multimeter

Reference Manual

8-364 DMM7510-901-01 Rev. B / May 2015

tspnet.write()

This function writes a string to the remote instrument.

Type TSP-Link accessible

Affected by Where saved Default value

Function

Usage

tspnet.write(connectionID, inputString)

connectionID

The connection ID returned from

tspnet.connect()

inputString

The string to be written

Details

The tspnet.write() function sends inputString to the remote instrument. It does not wait for

command completion on the remote instrument.

The Model DMM7510 sends inputString to the remote instrument exactly as indicated. The

inputString must contain any necessary new lines, termination, or other syntax elements needed

to complete properly.

Because tspnet.write() does not process output from the remote instrument, do not send

commands that generate too much output without processing the output. This command can stop

executing if there is too much unprocessed output from previous commands.

Example

tspnet.write(myID, "runscript()\r\n")

Commands the remote instrument to execute

a command or script named runscript() on

a remote device identified in the system as

myID

Also see

tspnet.connect() (on page 8-354)

tspnet.read() (on page 8-357)

Keithley DMM7510 Reference Manual

Other manuals for Keithley DMM7510