7½ Digit Graphical Sampling Multimeter Reference Manual Section 8: TSP comma
DMM7510-901-01 Rev. B / May 2015 8-285
trigger.model.getbranchcount()
This function returns the count value of the trigger model counter block.
Type TSP-Link accessible
Affected by Where saved Default value
Usage
trigger.model.getbranchcount(blockNumber)
The sequence of the block in the trigger model
Details
This command returns the counter value. When the counter is active, this returns the present count. If
the trigger model has started or is running but has not yet reached the counter block, this value is 0.
Example
print(trigger.model.getbranchcount(4))
Returns the value of the counter for building
block 4.
Also see
trigger.model.setblock() — trigger.BLOCK_BRANCH_COUNTER (on page 8-304)
trigger.model.initiate()
This function starts the trigger model.
Type TSP-Link accessible
Affected by Where saved Default value
Function Yes
Usage
trigger.model.initiate()
Also see
Trigger model (on page 3-76)
trigger.model.abort() (on page 8-284)
To Next Page
Loading...
Need help?
General
