Keithley DMM7510 Reference Manual

Section
6: SCPI command reference Model DMM7510 7½ Digit Graphical Sampling Multimeter Refe
rence Manual
6-234 DMM7510-901-01 Rev. B / May 2015
:TRIGger:STATe?
This command returns the present state of the trigger model.
Type Affected by Where saved Default value
Query only
Not applicable
Not applicable
Not applicable
Usage
:TRIGger:STATe?
Details
This command returns the state of the trigger model. The instrument checks the state of a started
trigger model every 100 ms.
This command returns the trigger state and the block that the trigger model last executed.
The trigger model states are:
• Idle: The trigger model is stopped.
• Running: The trigger model is running.
• Waiting: The trigger model has been in the same wait block for more than 100 ms.
• Empty: The trigger model is selected, but no blocks are defined.
• Building: Blocks have been added.
• Failed: The trigger model is stopped because of an error.
• Aborting: The trigger model is stopping because of a user request.
• Aborted: The trigger model is stopped because of a user request.
Example
:TRIG:STAT?
An example output if the trigger model is inactive and ended at block 9 is:
IDLE;IDLE;9
Also see
None
:TRIGger:TIMer<n>:CLEar
This command clears the timer event detector and overrun indicator for the specified trigger timer number.
Type Affected by Where saved Default value
Command only
Not applicable
Not applicable
Not applicable
Usage
:TRIGger:TIMer<n>:CLEar
<n>
Trigger timer number (1 to 4)

Keithley DMM7510 Specifications

General

Brand	Keithley
Model	DMM7510
Category	Multimeter
Language	English