Keithley DMM7510

Model DMM7510
7½ Digit Graphical Sampling Multimeter Reference Manual Section 6:
SCPI command reference
DMM7510-901-01 Rev. B / May 2015 6-7
:MEASure:DIGitize?
This command makes a digitize measurement, places it in a reading buffer, and returns the reading.
Type Affected by Where saved Default value
Query only Not applicable Not applicable Not applicable
Usage
:MEASure:DIGitize?
:MEASure:DIGitize:<function>?
:MEASure:DIGitize:<function>? "<bufferName>"
:MEASure:DIGitize:<function>? "<bufferName>", <bufferElements>
:MEASure:DIGitize? "<bufferName>"
:MEASure:DIGitize? "<bufferName>", <bufferElements>
<function>
The function to use for the measurement:
• Voltage: VOLTage
• Current: CURRent
If no function is defined, the presently selected one is used
<bufferName>
The name of the buffer where the reading is stored; if nothing is specified,
defbuffer1 is used
<bufferElements>
See Details