Keithley DMM7510

Section
3: Functions and features Model DMM7510 7½ Digit Graphical Sampling Multimeter
Reference Manual
3-94 DMM7510-901-01 Rev. B / May 2015
Using SCPI commands:
See the descriptions of the TRIGger:LOAD commands for details on the options available for each
predefined trigger model:
• :TRIGger:LOAD "ConfigList" (on page 6-219)
• :TRIGger:LOAD "DurationLoop" (on page 6-221)
• :TRIGger:LOAD "Empty" (on page 6-222)
• :TRIGger:LOAD "GradeBinning" (on page 6-223)
• :TRIGger:LOAD "Keithley2001" (on page 6-225)
• :TRIGger:LOAD "LogicTrigger" (on page 6-227)
• :TRIGger:LOAD "LoopUntilEvent" (on page 6-228)
• :TRIGger:LOAD "SimpleLoop" (on page 6-231)
• :TRIGger:LOAD "SortBinning" (on page 6-232)
Using TSP commands:
See the descriptions of the trigger.model.load() command for details on the options available
for each predefined trigger model:
• trigger.model.load() — ConfigList
• trigger.model.load() — DurationLoop
• trigger.model.load() — Empty (on page 8-289)
• trigger.model.load() — GradeBinning (on page 8-290)
• trigger.model.load() — Keithley2001 (on page 8-292)
• trigger.model.load() — LogicTrigger (on page 8-294)
• trigger.model.load() — LoopUntilEvent (on page 8-296)
• trigger.model.load() — SimpleLoop (on page 8-299)
• trigger.model.load() — SortBinning (on page 8-301)
Using a predefined trigger model to develop a trigger model
The Model DMM7510 includes predefined trigger models that you can use as a starting point for
developing your trigger model.
After modifying a predefined trigger model, you can save it in a saved setup for future use. See
Saving setups (on page 2-150
) for information on how to save a configuration.
Using the front panel:
1. Press the MENU key.
2. Under Trigger, select Templates. The TRIGGER MODEL TEMPLATES screen is displayed.