Keithley DMM7510 Reference Manual

Model DMM7510
7½ Digit Graphical Sampling Multimeter Reference Manual Section 7:
Introduction to TSP commands
DMM7510-901-01 Rev. B / May 2015 7-11
Common commands that cannot be used in scripts are shown in the following table with equivalent
commands that can be used.
Unavailable commands with TSP equivalents
Common commands TSP equivalent commands
*CLS
eventlog.clear() status.clear()
*ESE
status.standard.enable
*ESE?
print(status.standard.enable)
*ESR?
print(status.standard.event)
*IDN?
print(localnode.model)
print(localnode.serialno)
print(localnode.version)
*LANG
No equivalent
*LANG?
No equivalent
*OPC
opc()
*OPC?
waitcomplete() print([[1]])
*RST
reset()
*SRE
status.request_enable
*SRE?
print(status.request_enable)
*STB?
print(status.condition)
*TRG
No equivalent
*TST?
print([[0]])
*WAI
waitcomplete()

Keithley DMM7510 Specifications

General

Resolution	7.5 digits
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
DC Current Range	10 µA to 10 A
Resistance Range	10 Ω to 1 GΩ
Sampling Rate	1 MS/s
Memory	27.5 million readings
Display	5 inch capacitive touchscreen
AC Voltage Accuracy	±0.06% of reading
AC Current Range	10 A
Connectivity	USB, LAN, GPIB