Planet WGSW-28040 - Clear Ip Dhcp Snooping Statistics; Show Ip Dhcp Snooping

Command Guide of WGSW-28040
106
4.6.6 clear ip dhcp snooping statistics
Command:
clear ip dhcp snooping interfaces IF_PORTS statistics
Parameter:
IF_PORTS
specifies ports to clear statistics
Mode:
Global Configuration
Usage Guide:
Use the clear ip dhcp snooping interfaces statistics command to clear statistics that are recorded on interface.
Example:
The example shows how to clear statistics on interface gi1. You can verify settings by the following show ip dhcp
snooping interface statistics command.
switch# clear ip dhcp snooping interfaces gi1 statistics
switch# show ip dhcp snooping interfaces gi1 statistics
Interfaces | Forwarded | Chaddr Check Dropped | Untrust Port Dropped | Untrust Port With
Option82 Dropped | Invalid Drop
-------+-----------+-----------------+----------------------+-------------------------+--------
gi1 | 0 | 0 | 0 | 0 | 0
4.6.7 show ip dhcp snooping
Command:
show ip dhcp snooping
Mode:
Global Configuration
Usage Guide:
Use the show ip dhcp snooping command to show settings of DHCP Snooping.