Planet WGSW-28040 Command Guide

Command Guide of WGSW-28040
139
ip igmp snooping report-suppression
no ip igmp snooping report-suppression
Default:
ip igmp snooping report-suppression
Mode:
Global Configuration
Usage Guide:
‘no ip igmp snooping report-suppression’ will disable igmp v1/v2 igmp report suppression function. So when receive
report will forward to the vlan router ports.
The configure can use ‘show ip igmp snooping’.
Example:
The following example specifies that disable ip igmp snooping report-suppression test.
Switch(config)# no ip igmp snooping report-suppression
Switch# show ip igmp snooping
IGMP Snooping Status
--------------------
Snooping : Enabled
Report Suppression : Disabled
Operation Version : v2
Forward Method : mac
Unknown Multicast Action : Flood
4.10.3 ip igmp snooping version
Command:
ip igmp snooping version (2|3)
Parameter:
(2|3)
IP igmp snooping running version 2 or 3
Default:
ip igmp snooping version 2

Planet WGSW-28040 Specifications

General

Brand	Planet
Model	WGSW-28040
Category	Switch
Language	English