Planet WGSW-28040 - Logging

Command Guide of WGSW-28040
202
4.14 Logging
4.14.1 logging
Command:
logging
no logging
Mode:
Global Configuration
Usage Guide:
Enable/Disable the logging service.
logging
Enable the logging service. It is the global option of logging service. The status of the logging service is available from
the command “show logging”.
no logging
Disable the logging service. When the logging service is disabled, all messages will stop logging to the system.
show logging
Display the global logging status. It will show the logging configuration of the system, including the global logging
status, and the lists of logging services.
Example:
Switch(config)# show logging
Switch(config)# no logging
Switch(config)# show logging
Logging service is disabled
TARGET | STATUS | Server (PORT) | FACILITY | LOG LEVEL
----------+----------+---------------------------------+----------+----------------------------------
buffered | enabled | | |emerg, alert, crit, error, warning, notice, info
Switch(config)# logging
Switch(config)# show logging