Planet WGSW-28040 - Ipv6 Mld Snooping Report-Suppression

Command Guide of WGSW-28040
219
Snooping : Disabled
Report Suppression : Enabled
Operation Version : v1
Forward Method : mac
Unknown Multicast Action : Flood
4.17.2 ipv6 mld snooping report-suppression
Command:
ipv6 mld snooping report-suppression
no ipv6 mld snooping report-suppression
Default:
Enabled
Mode:
Global Configuration
Usage Guide:
‘no ipv6 mld snooping report-suppression’ will disable mld v1 report suppression function. So when receive
report will forward to the vlan router ports. The configure can use ‘show ipv6 mld snooping’.
Example:
This example shows how to specify that disable ipv6 mld snooping report-suppression test.
Switch(config)# no ipv6 mld snooping report-suppression
Switch# show ipv6 mld snooping
MLD Snooping Status
--------------------
Snooping : Enabled
Report Suppression : Disabled
Operation Version : v1
Forward Method : mac
Unknown Multicast Action : Flood