Planet WGSW-28040 - Show Radius

Command Guide of WGSW-28040
50
4.2.14 show radius
Command:
show radius
Mode:
Privileged EXEC
Usage Guide:
Use “show radius” command to show existing radius servers.
Example:
This example shows how to show existing radius server.
Switch# show radius
Prio | IP Address | Auth-Port| Retries| Timeout| Usage-Type| Key
-----+----------------+----------+--------+--------+-----------+---------
100 | 192.168.1.111 | 12345 | 5 | 10 | All |radiuskey