Planet WGSW-28040 - Enable Authentication

Command Guide of WGSW-28040
40
| acct-cmd(11) | default
| acct-cmd(12) | default
| acct-cmd(13) | default
| acct-cmd(14) | default
| acct-cmd(15) | default
ssh | login | default
| enable | default
| exec | default
| commands | default
| acct-exec | default
| acct-cmd( 0) | default
| acct-cmd( 1) | default
| acct-cmd( 2) | default
| acct-cmd( 3) | default
| acct-cmd( 4) | default
| acct-cmd( 5) | default
| acct-cmd( 6) | default
| acct-cmd( 7) | default
| acct-cmd( 8) | default
| acct-cmd( 9) | default
| acct-cmd(10) | default
| acct-cmd(11) | default
| acct-cmd(12) | default
| acct-cmd(13) | default
| acct-cmd(14) | default
| acct-cmd(15) | default
http | login | test1
https | login | test2
4.2.4 enable authentication
Command:
enable authentication LISTNAME
no enable authentication