Planet WGSW-28040 - Show Ipv6 Mld Filter; Show Ipv6 Mld Max-Group

Command Guide of WGSW-28040
237
4.17.21 show ipv6 mld filter
Command:
show ipv6 mld filter [interfaces IF_PORTS]
Parameter:
[interfaces
IF_PORTS]
Show specifies ports filter
Mode:
privileged mode
Usage Guide:
This command will display ipv6 mld port filter info.
Example:
This example shows how to show ipv6 mld filter
Switch# show ipv6 mld filter
Port ID | Profile ID
---------+--------------
gi1 : 1
gi2 : None
gi3 : None
gi4 : None gi5 : None
--More--
4.17.22 show ipv6 mld max-group
Command:
show ipv6 mld max-group [interfaces IF_PORTS]
Parameter:
[interfaces
IF_PORTS]
Show specifies ports max-group