Planet WGSW-28040 - Show Dot1 X Authenticated-Hosts; Show Dot1 X Interface

Command Guide of WGSW-28040
32
Command:
show dot1x
Mode:
Privileged EXEC
Usage Guide:
Use “show dot1x” command to show dot1x enabling status.
Example:
This example shows how to show the dot1x enabling status.
Switch# show dot1x
802.1x protocol is: Disabled
802.1x protocol version: 2
4.1.11 show dot1x authenticated-hosts
Command:
show dot1x auth-hosts
Mode:
Privileged EXEC
Usage Guide:
Use “show dot1x auth-hosts” command to show all dot1x authorized hosts.
Example:
This example shows how to show the dot1x authorized hosts.
Switch# show dot1x auth-hosts
User Name | Port | Session Time | Authentication Method | MAC Address
------------+-------+----------------+------------------------+--------------
8389_1 | GE3 | 0: 0: 0:20 | Remote | 00:30:4F:D5:5C:19
4.1.12 show dot1x interface