Command Guide of WGSW-28040
280
4.23.7 show rmon alarm
Command:
show rmon alarm (<1-65535> | all)
Parameter:
specifies alarm index to show
Mode:
Global Configuration
Usage Guide:
Use the show rmon alarm command to show existed RMON alarm entry.
Example:
The example shows how to show rmon alarm entry.
Switch(config)# rmon alarm 1 interface gi1 pkts 300 delta rising 10000 1 falling 100 1
startup rising-falling owner admin
Rmon Alarm Index : 1
Rmon Alarm Sample Interval : 300
Rmon Alarm Sample Interface : gi1
Rmon Alarm Sample Variable : Pkts
Rmon Alarm Sample Type : delta
Rmon Alarm Type : Rising or Falling
Rmon Alarm Rising Threshold : 10000
Rmon Alarm Rising Event : 1
Rmon Alarm Falling Threshold : 100
Rmon Alarm Falling Event : 1
4.23.8 show rmon history
Command:
show rmon history (<1-65535> | all)
To Next Page
Loading...
Need help?
General