Planet WGSW-28040 - 3. SWITCH MANAGEMENT

Command Guide of WGSW-28040
31
switch(config-if)# exit
switch(config)# show dot1x guest-vlan
Guest VLAN ID: 2
Port | Guest VLAN | In Guest VLAN
-------+------------+---------------
gi1 | Enabled | No
gi2 | Disabled | ---
gi3 | Disabled | ---
gi4 | Disabled | ---
gi5 | Disabled | ---
gi6 | Disabled | ---
gi7 | Disabled | ---
gi8 | Disabled | ---
gi9 | Disabled | ---
gi10 | Disabled | ---
gi11 | Disabled | ---
gi12 | Disabled | ---
gi13 | Disabled | ---
gi14 | Disabled | ---
gi15 | Disabled | ---
gi16 | Disabled | ---
gi17 | Disabled | ---
gi18 | Disabled | ---
gi19 | Disabled | ---
gi20 | Disabled | ---
gi21 | Disabled | ---
gi22 | Disabled | ---
gi23 | Disabled | ---
gi24 | Disabled | ---
gi25 | Disabled | ---
gi26 | Disabled | ---
gi27 | Disabled | ---
gi28 | Disabled | ---
4.1.10 show dot1x